X (S) M-50*40 Drop Door Type Rubber Kneader/Rubber Machinery
|FOB Price:||US $7,000-23,000 / Piece|
|Min. Order:||5 Pieces|
|Min. Order||FOB Price|
|5 Pieces||US $7,000-23,000/ Piece|
|Production Capacity:||1000sets/One Year|
|Transport Package:||Wooden Box|
- Model NO.: X(S)M-50*40
- Condition: New
- Automatic Grade: Semiautomatic
- Trademark: HaiNeng
- Origin: China
- Certification: SGS
- Customized: Customized
- Structure: Horizontal
- Specification: X(S)M-50*40
- HS Code: 8477800000
It is used to kneading and mixing of various rubber and plastics.
1. The mixing chamber is of drilled structure with quick and better beating/cooling effects.
The inner wall is coated with hard chrome for a long service life.
2. Bulid-up welding of hard alloy for the two,three,four ridge top and two sides of the
rotor, all the working surfaces are coated with hard chrome, good appearance and abrasive
resistance. The cooling/heating medium can pass through the hollow of the rotor.
3. The top of the rotor adopts constant hydraulic pressure seal structure, the seal effect
is good with a long service time and high pressure lubrication automatic alarm when using up
4. The upper bolt relieves the pressure automatically to protect the machine if the machine works a too long time under overload condition.
5. The working surface of up and down bolts are coated with hard chrome, good appearance and abrasive resistance. The cooling/heating medium can pass through the inner hollow of down bolt..
6. A rotary oil cylinder is used for the discharge door, smooth running and accurate positioning.
7. Use two shafts put-out hard teeth reducer and gear coupling or "+" type universal joint, the transmission is smooth with high efficiency, low noise level and long service life.
1. The blade of rotors is designed with banbury type and is welded with jacket construction for cooling water or steam.
2. The top and each working surface of the blade are weld with hard alloy and it is corrosion-resistant and wear-resistant.
3. The end face of the rotor uses hermatical seal devices with oil pressure adjusting.
4. Discharge device is drived by double-rack wiggle cylinder.
5. Electric control system adopts advanced PLC control technology and intelligent display Terminal, you can set control
parameters as needed, and work properly tips.
Total volume of the mixing chamber
Working capacity of mixing chamber
Rotation speed of main (rear) rotor
Speed ratio of (front/rear) rotor
Main motor power
Pressure of the ram
Pressure of cooling water
Wooden case, shipping container
No 88XiNing Road LinGang Industrial Park JiaoNan QingDao City China
QingDao HaiNeng Machine Manufacture Co.,Limited